ProReamer Get the Job Done. Every Single Time.
Trusted by plumbers, builders, maintenance crews, handymen, and DIY homeowners across all skill levels.
Stop Cutting Out Good Pipe for One Bad Fitting.
One wrong fitting shouldn’t force you to cut back feet of good pipe or open walls. ProReamer fixes the mistake without destroying the install.
Just chuck it in your ½" drill, ream the joint from the inside, and drop in fresh pipe on a clean, smooth hub. No demo. No patching. No wasted materials.
Each kit includes up to 8 heads from 0.5” to 4” so you're covered for almost any job.
6 Reasons You Should Have ProReamer in Your Toolbox
Whether you're a licensed plumber, a contractor on tight deadlines, or a DIYer — ProReamer lets you fix pipe mistakes in under 10 seconds with zero damage or waste.
1
Stop Cutting Out Good Pipe
Remove a single bad fitting without tearing out entire runs. ProReamer cleans the hub from the inside so you salvage the pipe instead of replacing it.
2
Save Valves, Flanges & Fittings
Keep expensive valves and fittings in place. Ream the socket, drop in new pipe, and move on — no more wasting $20–$40 parts over one mistake.
3
Fix Mistakes in 10 Seconds
Chuck it in any ½" drill, ream the hub, and you're done. What used to take 30–45 minutes now takes just 10 seconds.
4
No Demo. No Patching. No Painting.
Fix the problem without opening walls or repairing drywall. Zero demo. Zero mess. Just clean, fast plumbing repairs.
5
Perfect, Leak-Free Joints
The triple-carbide cutting head leaves a smooth, square hub ready for primer, glue, and a proper pressure-tight connection.
6
Pays for Itself on the First Job
One saved valve, one avoided callback, or one joint you don't have to demo — and ProReamer has already paid for itself.
See ProReamer in Action
Our Certifications
Join Thousands of Satisfied Customers
Delivering quality and consistency that customers rely on.
92%
Achieved Flawless Installations
Felt confident with perfect fittings after using the tool for the first time.
87%
Streamlined Workflow Effortlessly
Noticed significant time savings during plumbing projects.
94%
Reduced Leak Incidents
Fewer leaks thanks to precision cuts from the high-quality blades.
ProReamer vs Traditional Fixes
Maximum compatibility of sizes & materials
Built for over 1000 uses per tool
Four-sided tungsten carbide cutting blade
New patented 3-blade design
Durable carrying case
Illustrated user guide & video tutorial
PROREAMER premium customer service
Traditional Method
Limited compatibility of pipe sizes
Tools wear out quickly
Dull blades, uneven cuts
Old single-blade design
No carrying case
No guide, no tutorial
Poor or no customer support
FAQ
Straight answers to the most common questions plumbers ask before adding PROREAMER to their kit.
What exactly does PROREAMER do?
PROREAMER lets you remove a PVC fitting that’s already been glued using your drill — no heat gun, no cutting, and no unnecessary demolition. You clean out the inside of the fitting and reuse the existing pipe or valve.
What pipe sizes is it designed for?
The PROREAMER head is designed for standard drain PVC sizes: 32, 40, 50 and 100 mm. It’s made specifically for drain and waste PVC, not for pressure-rated PVC systems.
Can I use it with any drill/driver?
Yes. PROREAMER is built with a standard hex shank, so it fits into any regular drill or driver with a standard chuck. Just tighten it down and you’re ready to go.
Is it durable? Do the blades wear out quickly?
The tool is made from a high-grade aluminum alloy body with ISO-certified carbide inserts. The blades are designed for long life and can be rotated to use all four cutting edges. When they’re finally worn, you can simply replace the inserts.
Is PROREAMER complicated to use?
No. Just chuck it into your drill, slide it into the glued fitting and let it work. In a few seconds, the inside of the fitting is cleanly reamed out and ready for fresh primer and glue.
How is it better than using a heat gun?
Compared to a heat gun, PROREAMER is:
• Faster — no long heating time.
• Safer — no open heat, no risk of burns or overheating the PVC.
• Cleaner — you get a neat, even bore instead of softened, distorted plastic.
• More convenient — no extension cord, no hot tool to manage on site.
Is PROREAMER certified?
Yes. PROREAMER is RoHS compliant, tested by SGS and meets CE requirements. The materials used are produced under ISO / GB-T standards for quality and safety.
Is the PROREAMER deburring head dangerous?
No. The PROREAMER head is designed with an internal guide insert that matches the inside diameter of the pipe. It locks itself in place inside the PVC and prevents slipping or jumping, keeping the tool stable and secure even at higher speeds.
Can debris stay inside the line after reaming?
No. The central shaft naturally pushes chips and shavings out of the fitting as it rotates. The reaming action is clean, with no leftover fragments or blockage in the line when used properly.
Can I use it in tight or hard-to-reach areas?
Yes. PROREAMER can be used with an angle drill or right-angle attachment, which makes it easier to work under sinks, behind cabinets or in tight corners without tearing out the installation.
Does it also work on larger diameters?
Absolutely. The whole PROREAMER range is built with three carbide blades engineered for a faster, smoother cut. That design makes it just as effective on larger diameters, up to 100 mm, without requiring extra effort from you or your drill.
